Back to the History of the Coupés and Convertibles |
|
Type | Brakes | Front suspension | Rear suspension | Steering | Wheels and tyres |
220SEb | Hydraulic with servo assistance; discs at front and
drums at rear; mechanical handbrake on rear wheels. from 08/1963 dual hydraulic circuit. |
Independent, with unequal-length wishbones, coil springs and anti-roll bar. | Single-joint, low-pivot swing-axles, with coil springs
and compensating spring. from 07/1963: air suspension on rear axle optional. |
Recirculating ball with 22,7:1 ratio. Power-assisted type as option with 17,3:1 ratio. | wheels: 13in tyres: 7,25-13 (Coupé) 7.50-13 (Convertible) |
250SE | Hydraulic dual-circuit and discs on all four wheels. | as 220SEb | as 220SEb but hydropneumatic self levelling. | as 220SEb | wheels: 14in tyres: 7,35-14 or 185/14 (Coupé) 7.75-14 or 195/14 (Convertible) |
280SE | as 250SE | as 220SEb | as 250SE | as 220SEb | wheels: 14in tyres: 7,35-14 or 185/14 (both models) |
280SE 3.5 | as 250SE | as 220SEb with rubber auxiliary springs. | as 250SE with rubber auxiliary springs. | Servo-assisted with 17.3:1 ratio. | wheels: 14in tyres: 185/14 (both models) |
300SE | as 250SE | as 220SEb but with air spring suspension instead of coil springs. | as 220SEb but with air spring suspension instead of coil springs. | Power-assisted, with 17,3:1 ratio. | wheels: 14in tyres: 7,36-14 or 185/14 (Coupé) tyres: 7,75-14 or 195/14 (Convertible) |
Back to the top |
Previous: 10) Engine specifications |
Next: 12) Dimensions |